Trouble at mill? 12 Broads watermills undergo 3D lasers scans
PUBLISHED: 16:41 02 October 2017 | UPDATED: 16:41 02 October 2017
Trouble at t’mill? That’s what is being investigated in the fields and marshes of the Broads as our weatherbeaten watermills are getting a 21st century examination.
Twelve of the iconic buildings, which have helped drain marshy areas for centuries, are getting the ultimate close-up from state-of-the-art laser technology.
And the valuable historical and structural information gathered by the 3D scanners will be used to give the delightful dozen a spruce-up.
Broads Authority historic environment manager Ben Hogg said the programme formed part of the development phase of a project titled Water, Mills and Marshes, a Heritage Lottery-funded Landscape Partnership Bid.
He said: “There are 74 iconic, redundant drainage mills that are in various states of disrepair across the Broads Authority executive area.
“I was tasked with identifying a series of windmills that the project could do some restoration work on, not necessarily to completely restore, but to get into better condition.”
He said the final 12 were selected for various reasons. “We were looking for mills that might be on footpaths, or ones that were key landscape features with significant heritage value.”
He added: “We found it was far more cost effective than doing traditional survey work and also provided us with highly accurate and incredibly detailed images on each mill.”
The scanner was placed around the interior and exterior of each mill to get a comprehensive picture of the structure.
“It allowed us to complete the work in less than half the time. We’re getting info now that we have never seen in detail like this before. We can literally see if there is a crack in a brick.”
He said the information would be used to produce a set of architectural drawings that would be included in a planning application for the work that was needed.
“But what we’ve actually got for a fraction of the cost of a traditional survey is something of incredible value in terms of a resource. These scans will allow us to set up virtual tours of the mills which could be linked to a map on a website where you click on a point and open up these images.”
The project proved so successful that the Broads Authority has funded another 10 mills to be scanned by the end of the year.
Mr Hogg said they would hear in October whether delivery phase funding for the work they wanted to carry out on the original 12 was granted.
Windmills of the Broads
Norfolk has become synonymous with windmills as they form a significant part of the landscape.
Three types of windmill are commonly found in England: the tower mill, which consists of a brick or stone tower on which sits a wooden cap; the smock mill, with a sloping, horizontally weatherboarded or thatched tower; and the post mill, the earliest type of windmill known in this country that is supported by a post which pivots.
All three can be seen in Norfolk and were used for grinding corn and flour and for drainage, particularly on the Broads.
Broads Authority historic environment manager Ben Hogg said the earliest windmills on the Broads dated back to the late 18th century while the last were built early in the 20th century.
He said the technology used in their construction and operation had evolved over the years.
“The evolution of mill technology is amazing and the scanning project has allowed us to really capture it in detail.”